This video is how i install my mega amps, dont forget to peruse our youtube channel
below you will find install diagrams for the mega amp2.0

DEPENDING ON YOUR SEGA GENESIS MOTHERBOARD REVISION, YOU WILL HAVE DIFFERENT JUMPER SECTIONS AND A DIFFERENT INSTALL DIAGRAM. MAKE SURE YOU USE THE CORRECT INSTALL DIAGRAM FOR YOUR MODEL GENESIS. WITCH CAN BE FOUND ONCE YOU OPEN THE GENESIS, IT WILL SAY WHAT VA YOU HAVE DIRECTLY ON THE MOTHERBOARD

BIG THANKS to helder for creating all of these diagrams

SEGA GENESIS MODEL 2, VA0

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

REMOVE ALL COMPONENTS LOCATED IN RED BOX, AND SOLDER A WIRE FROM THEM TO THE MEGA AMP 2.0. for the ground and 5V make sure to bridge both pads where the resisters used to be, and then connect them to power/ground on the mega amp

This is for your SEGA CD to work with the mega amp. Remove these components and replace just the R30 and R27 with a 1kohm resistor

SEGA GENESIS MODEL 2, VA1 & VA1.8

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX


REMOVE ALL COMPONENTS LOCATED IN RED BOX, AND SOLDER A WIRE FROM THEM TO THE MEGA AMP 2.0. for the ground and 5V make sure to bridge both pads where the resisters used to be, and then connect them to power/ground on the mega amp


This is for your SEGA CD to work with the mega amp. Remove these components and replace just the R30 and R27 with a 1kohm resistor

SEGA GENESIS MODEL 3, VA1

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 3, VA2

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 2, VA2


CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 2.3, VA2

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 2, VA3

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 2, VA4

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX

SEGA GENESIS MODEL 1, VA7

CREATE A SOLDER BRIDGE ON THE MEGA AMP, CONNECTING THE POINTS IN THE BOX